Send inquiry
Gardon Self-priming Deep Well Water Pump with Pressure Switch (FCP)
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System
FCP Jet Deep Well Structure
Production Work-flow Chart of Pump
About Us
FAQ
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System
Technical Data
FCP Jet Deep Well Structure
| Item | Description | Material | Item | Description | Material | Item | Description | Material | Item | Description | Material | Item | Description | Material |
| 1 | Plug | Brass H59 | 7 | Key | SS420 | 13 | Terminal Block | ABS | 19 | Spring Ring | 65Mn | 25 | O ring | NBR |
| 2 | Washer | NBR | 8 | Impeller | Brass H59 | 14 | Capacity | CBB60 | 20 | Fan Cover | A3 | 26 | Cover | ABS |
| 3 | Fliter | ABS | 9 | Screw | A3 | 15 | Screw | Steel-A3 | 21 | End Cover | AL-ZL102 | 27 | Nut | H59 |
| 4 | O ring | NBR | 10 | M.Seal | SS304&NBR | 16 | Rotor | 22 | Foot | 28 | Diffuser | ABS | ||
| 5 | Cover | Plastic | 11 | Drop Guard | NBR | 17 | Bearing | 23 | Stator | 29 | O ring | NBR | ||
| 6 | Screw | 12 | Terminal Cover | ABS | 18 | Fan | ABS | 24 | End Cover | AL-ZL102 | Pump Body | ABS |
Production Work-flow Chart of Pump
About Us
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.