Send inquiry
. Advantage of 20-25T/H dry mix mortar manufacturing plant
1. In contrast to job-site mortars ,dry mortar is also called pre-mixed mortar ,which is produced in the factory with dedicated facilities on batching and blending of ingredients in highly-controlled process .It can be used directly just by adding water in job site .
2. It has advantages of consistent quality ,controlled inventory ,saving time and labor cost .By adding different chemical additives ,it has fine properties of bond ,thermal and acoustic insulation,crack-resistance ,workability , Water-retention,wear-proof,anti-corrosion,etc.
3. Dry mortar can match different kinds of new construction materials by improving formulation.These good properties not only improve building's quality and life greatly,but also decrease the usage of mortar in a large degree.
4. The demand for dry mortar has increased rapidly due to its outstanding merit comparing with the mortar mad in job-site.
2. Usage of 20-25T/H dry mix mortar manufacturing plant
1,Masonry mortar
2,Thin and smooth wall mortar
3, Hand-plastering screeding mortar
4, Colored coating mortar
5, Water-proof mortar
6, Plaster powder
7, Wall plastering mortar
8, Ceramic tile adhesive mortar
9, Self-leveling mortar
10,Heat-preservation mortar.
Specifications:
1. In contrast to job-site mortars ,dry mortar is also called pre-mixed mortar ,which is produced in the factory with dedicated facilities on batching and blending of ingredients in highly-controlled process .It can be used directly just by adding water in job site .
2. It has advantages of consistent quality ,controlled inventory ,saving time and labor cost .By adding different chemical additives ,it has fine properties of bond ,thermal and acoustic insulation,crack-resistance ,workability , Water-retention,wear-proof,anti-corrosion,etc.
3. Dry mortar can match different kinds of new construction materials by improving formulation.These good properties not only improve building's quality and life greatly,but also decrease the usage of mortar in a large degree.
4. The demand for dry mortar has increased rapidly due to its outstanding merit comparing with the mortar mad in job-site.
2. Usage of 20-25T/H dry mix mortar manufacturing plant
1,Masonry mortar
2,Thin and smooth wall mortar
3, Hand-plastering screeding mortar
4, Colored coating mortar
5, Water-proof mortar
6, Plaster powder
7, Wall plastering mortar
8, Ceramic tile adhesive mortar
9, Self-leveling mortar
10,Heat-preservation mortar.
Specifications:
Model | Automatic Dry mortar Production line |
Capacity | 20-25 t/h |
Mixing system | DWZ Double Shaft Paddle Mixer |
Total power | 96.5kw |
Mortar Mixer | DWZ2000 Double Shaft Paddle Mixer, 1 unit |
Discharge capacity | 1.56t per batch |
Feeding capacity | 1.56t per batch |
Mixing cycle time | 150S |
Motor power | 18.5kw |
Air Cylinder | QGB100*300 |
Total weight | 2500kg |
Overall dimension L*W*H | 2170*1900*1550 mm |
Pre-mixing hopper | 2.0 m3 Pre-mixing hopper,1 unit |
Volume | 2.0m3 |
Pneumatic Valve | DN150 |
End Product Hopper | 2.0 m3 End product hopper, 1 unit |
Volume | 2.0m3 |
Motor Power | 7.5kw |
Raw Material Storage System | 100T Detachable Silo, 1 set |
Silo Diameter | 3.0m |
Silo Height | 9.0m |
Silo Total Height | 12.0m |
Discharge Height | 1.5-3.0m |
Pneumatic Valve | DN300 |
Weight | 5.0 tons |
Batching & Weighting System | V=2m3 Batching Weighing Hopper, 1unit |
Volume | 2.0m3 |
Motor power | 4kw |
Screw Conveyor | LSY165*2800mm |
Overall dimension L*W*H | 3.2* 1.26 *1.7m |
Conveying System | LSY219 Screw Conveyor,2 units |
Tube Diameter | 219mm |
Spiral Diameter | 180mm |
Carrying Capacity | 45t/h |
Conveying Length | 2-13m |
Working Angle | 0-45degree |
Motor Power | 11kw |
Conveying System | TD250 Bucket Elevator, 1 unit |
Conveying Capacity | 20-25 t/h |
Lifting Speed | 1.6 m/s |
Motor power | 15kw |
Height(include the embeded part) | 11.7m |
Packing System Type & Quantity | DGF-50BAutomatic valve port packer, 2 units |
Weighing scope | 5~50kg |
Capacity | 10-15 t/h per unit |
Power | 3kw |