TitleProduct

Lead Free Environmental Protection Reflow Soldering Furnace

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Guangdong

  • Validity to:

    Long-term effective

  • Last update:

    2017-10-22 02:08

  • Browse the number:

    122

Send an inquiries

Company Profile

Shenzhen ETA Electronic Equipment Co., Ltd.

By certification [File Integrity]

Contact:Mr. Henry Wong(Mr.)  

Email:

Telephone:

Phone:

Area:Guangdong

Address:Guangdong

Website: http://etasmt.sunla-tech.com/

Product Details


Main product: SMT reflow oven, reflow solder, solder reflow, SMT Pick and Place Machine, SMT Placement Machine, SMT/SMD Equipment, SMT Assembly, SMT Screen Printer



Lead free Environmental protection Reflow soldering furnace

Model: ETA E10
Brief: E10 Lead free hot air reflow oven
Heating System
> Eight groups of top and bottom forced hot air convection heating zones.
> Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air convection.
> Independent temperature control in each zone to ensure temperature uniformity within the process tunnel.
> Power consumption savings of 1/3 as compared to other systems.
> Patented motorized blower in each zone is designed to ensure stable air pressure, withstand high process temperature and is disturbance-free.
> Audible and light tower alarm for temperature limits, PCB drop, PCB jam and blower malfunction.
> Fast start-up (within 20 minutes) from room temperature to work temperature due to the high efficiency of the motorized heating plates.
Cooling System
> Two (2) groups of forced air convection cooling zones.
Distortion-free Conveyor System with Automated Chain Lubrication
> Combined pin chain rail and mesh belt conveyor system (Note: Mesh belt is not available on machines with center board support. )
> Closed-loop computer control of the conveyor provides a precise and repeatable reflow process.
> Automated chain lubrication system with a computer controlled central reservoir. Lubricant is added directly to the conveyor brush eliminating operator interface for this maintenance.
Fresh Air Recharge System
> Fresh air is supplied to each zone uniformly to provide a rapid process transfer.
Flux Management System
> Air amplifier forces supercharged flux collection and recirculation.
> Flux exhaust chimney with drawer shaped filter net is easy to access for maintenance.
Control System
> PC control system with windows based control software.

Additional Features
> Integrated UPS will be automatically activated in case of main power failure and will keep control PC and conveyor running for minimum 8 minutes to send out PCBs inside the oven tunnel.
> Motorized hood lift allows easy access to the inside of the oven for service and maintenance.
> Five (5) profiling ports and integrated profiling software are designed for convenient temperature profiling.
> Swing arm control PC station
> Four (4) emergency stop switches
> Two (2) exhaust ports
> SMEMA interface
> System documentation
Model E10
GENERAL
Outside dimension 6100x1353x1490mm
Standard color Computer grey
Weight Approx. 2450kg
Number of heating zones Up10/bottm10
Length of heating zones 3891mm
Number of cooling zones 2(built-in)
Exhaust volume 10M3/minx2 Exhausts
Standard feature of control system
Electric supply required 3phase, 380V 50/60Hz 
Electric power required 80KW
Power for warm up 36KW
Power consumption 11KW
Heating pattern Up& Bottom Hot air
Warming time Approx. 30minute
Temp. setting range Room temp__300degree
Control system PLC+ Computer
Temperature control method PID close loop control +SSR driving
Temperature control precision ± 1.0degree
Temperature deviation on PCB ± 1.5degree
Data storage Process data and status storage (80GB)
Abnormal alarm Abnormal temperature(extra-high/extra-low temp)
Board dropped alarm Tower light: yellow warming: Green-normal: Red-abnormal
Standard features of conveyor system
Max. width of PCB Max: 450mm(Standard)
Rail Number 1 Lane(standard)
Components clearance Top/bottom clearance of PCB is 25mm
Conveyor height Light → right(option: R→ L)
PCB transmission agent Air-reflow=chain +mesh (Standard)
Conveyor height 900/± 20mm
Conveyor speed range 300~2000mm/min