Product Details
INVERTER ACDC TIG/MMA/CUT MACHINE TC164
IGBT advanced double inverter technology
Single phase power supply: 1X220/230/240V50/60Hz Fuse 14.7/20.7A
Light weight.
HF arc start for TIG&CUT, arc force for MMA
2T/4T and pulse control function for TIG
AC/DCTIG suitable for steel, stainless steel, aluminm.
Digital display
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp, TIG&CUT torch 4m, gas hose 2m.
Over hot and current protection.
Input Voltage: 1x220/230/240V 50/60Hz
Input Power: 4.8KVA
No load voltage: 60~80V(Welding)/ 200V(CUTTING)
Current: 5~160A(Welding)/15~40A(Cutting) Duty cycle: 35%
Current up-slope time: 0~10s Gas post flow time: 1~25s Current down-slope time: 0~10s
SP value (balance): 30~70% AC frequency: 20~100Hz(250Hz)
Model |
TC164 AC/DC |
TC205 AC/DC |
Input |
voltage |
AC220/230/240V 50Hz |
AC220/230/240V 50Hz |
AC TIG |
No load voltage |
60-80V |
60-80V |
Base Current Adjusting range |
20-160A |
20-200A |
AC balance |
30-70% |
30-70% |
AC square wave frequency |
20-100Hz |
20-250Hz |
Rated Duty Cycle |
35% |
35% |
DC TIG
|
Pulse current adjusting range |
5-160A |
5-200A |
Rated Duty Cycle |
35% |
35% |
Current down-slope time |
0~10S |
0~10S |
Base Current Adjusting range |
5-160A |
5-200A |
Pluse Width Ratio |
0.1~0.9 |
0.1~0.9 |
Pluse Frequency |
0.5~25Hz |
0.5~25Hz |
After flow time |
1~25S |
1~25S |
Arc starting Mode |
High frequency arc striking |
High frequency arc striking |
DC MMA |
No load voltage |
60-80V |
60-80V |
Base Current Adjusting range |
5-160A |
5-200A |
Rate output current |
160A |
200A |
Rated Duty Cycle |
35% |
35% |
CUT |
(Base) Current Adjusting range |
15-40A |
15-50A |
Rated Duty Cycle |
35% |
35% |
Max Cutting thickness |
8 |
12 |
Efficiency |
≥83% |
≥83% |
Weight |
49KG |
51KG |
Protection Class of enclosure |
IP21S |
IP21S |
Outline dimensions mm2 |
430X200X290 |
430X200X290 |
Accesorries |
TIG welding torch WP-26/Cutting torch WSD-60/ Welding clamp/Welding holder/Gas inlet pipe/ Air pressure Regulator etc |