TitleProduct

850MHz Signal Booster GSM Signal Repeater

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Guangdong

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-17 07:54

  • Browse the number:

    138

Send an inquiries

Company Profile

Shenzhen Keenpower Electronic Limited

By certification [File Integrity]

Contact:Ms. Fiona Wu(Mr.)  

Email:

Telephone:

Phone:

Area:Guangdong

Address:Guangdong

Website: http://szkeenpower.sunla-tech.com/

Product Details


How is mobile phone signal repeater GSM/DCS/ 2G/3G/4G WORKING ?
 
 ?The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone 
amplifier through the connection cable (coax).
?After the signal is accepted by the phone amplifier, the device amplifies it.
?Then this amplified signal goes through the connection cable (coax) to the inside antenna.
?And after that, the amplified signal transmits to the cell phone.
 

 
A regular repeater CDMA consists of:
5dB outdoor antenna
3dB indoor antenna
RG6-50 OHM outdoor Coaxial Cable-10m
mounting accessories
AC power supply
user manual
Whole Package Weight1KG
Whole Package Size310x130x110mm(L x W x D)
 
 Features of mobile phone signal amplifier
 
A. High-gain linear power amplifier
B . ALC and AGC function technology ,
C. Ultra-low noise receive amplifier
D. There is no interference to the base station ,right after the opening of the original system and the base station without the need to adjust parameters ,
E. Stable and reliable electromagnetic compatibility design .
F. The base station dose not cause an increase in background noise ,but will not lead to a decline in the quality of the base station communications
G. With full-duplex communication mode .
H. dispel the heat effective reasonable ,the structure is pretty ,the volume is suitable .
 
 Signal repeater Installation diagram (very convenient and easy to install)
 

How should you install repeater (very easy and simple):
Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).
 
Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.
 
Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.
 
step 4: Mount your indoor antenna with signal repeater
step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.
 
Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.
Indoor and outdoor antenna must be separated by wall.
Model No 9929
Parameter data Uplink Downlink
Frequency Range CDMA 824-849mhz 869-894mhz
Output Power 20±2dBm 20±2dBm
Gain 60 ±2 dB 60±2dB
Bandwidth 60M
Ripple in Band ≤5dB
Spurious Emission 9KHz~1GHz ≤ -36 dBm
1GHz~12.75GHz ≤ -30 dBm
VSWR ≤3
MTBF >50000 hours
Power Supply AC:100~240V, 50/ 60Hz;DC:5V 2A
Power Consumption < 5W
Impedance 50 ohm
Mechanical Specification
RF Connector N-Female N
Dimensions (D*W*H ) 125*110*25(mm)
Net weight 0.6Kg
Installation Type Wall Installation
Environment Conditions IP40
Humidity < 90%
Operating Temperature -10°C ~ 55°C